R-290 Refrigerant: 4 Critical Facts About Washington’s Oct 30 A3 Vote

R-290 refrigerant is at the centre of a fight in Washington State. The State Building Code Council is weighing an amendment that would allow factory-built equipment using natural hydrocarbon (A3) refrigerants such as R-290, with a vote scheduled for October 30, 2026.

What happened with R-290 refrigerant

R-290 is high-grade propane with a global warming potential (GWP) of 3. The proposal would rely on IEC safety standards instead of UL standards.

Source: HomePros News.

Key details of the R-290 refrigerant story

  • The proposal: allow factory-built equipment using A3 refrigerants like R-290 in Washington.
  • Vote date: October 30, 2026.
  • Standards: the amendment relies on IEC safety standards, not UL.
  • Opposition: HARDI, AHRI, PHCC and ACCA’s Washington chapter asked state leaders to block it.
  • Their concern: it would allow about 40 times the propane charge UL currently permits, and could conflict with EPA rules.
  • Wider context: ACCA notes New York is pursuing an A3 transition between 2027 and 2034.

Why it matters

Propane is a fuel G3 students already study as a gas. If R-290 refrigerant spreads across North America, techs may need training in both sides: gas safety and refrigerant safety. Propane is heavier than air and highly flammable, which is exactly why charge limits and standards matter.

Here in Ontario, installers are still moving from R-410A to A2L refrigerants such as R-454B and R-32. The Washington debate hints at what could come after A2Ls. Whatever happens on October 30, the push toward lower-GWP refrigerants is clearly continuing.

What to do next

  • Learn the ASHRAE safety classes: A1 (non-flammable), A2L (mildly flammable) and A3 (highly flammable).
  • Get A2L training now, since those refrigerants are already arriving in Ontario.
  • Review propane properties and safe handling in our G3 gas technician glossary, and the related clauses in our B149.1-25 code book guide.
  • Watch for the result of the October 30 vote and any EPA response.

For more background, see the original report from HomePros News and US EPA SNAP program. On our site, try our G3 gas technician glossary and B149.1-25 code book guide.

How to use HVAC news on the job and at home

Industry news can seem far from a single service call, but it usually ends up affecting the equipment you install, the paperwork customers ask about, or what homeowners pay. A short checklist helps turn headlines into action.

  • Equipment: which brands, refrigerants and parts will you be servicing next season?
  • Codes and standards: has anything changed in the B149.1 code, the Ontario Fire Code or TSSA requirements that affects your work?
  • Customers: are there rebates, rate changes or safety rules worth mentioning on a service call?
  • Training: is there a new skill, like A2L refrigerant handling, that you should pick up before it becomes required?

For homeowners, the same news helps you ask better questions before you sign a contract or book a repair. Always use a TSSA-registered contractor for gas work, and ask for model numbers, permits and paperwork in writing. We follow Ontario HVAC and gas news every day so G3 students, working technicians and homeowners can keep up without searching dozens of sites. If a story affects your own home or job, check the official source linked above before you act.

FAQ

What is R-290 refrigerant?

R-290 is high-grade propane used as a refrigerant. It is classed A3 (highly flammable) and has a GWP of 3.

Why do industry groups oppose Washington’s proposal?

HARDI, AHRI, PHCC and ACCA’s Washington chapter say it would allow about 40 times the propane UL permits and could conflict with EPA rules.

Does this affect Ontario?

Not directly. Ontario is moving from R-410A to A2L refrigerants, but the debate shows where refrigerants may head next.

Similar Posts

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *